Coolant Bottle / Thermostat Removal - Polaris 850 MATRYX INDY XC 129 2021 Manual

COOLANT BOTTLE / THERMOSTAT
REMOVAL
1. Remove the side panels and hood.
2. Remove the resonator. See Exhaust Removal page
3.152.
3. Remove the console. See Console Removal page
9.23.
4. Remove the fuel tank. See Fuel Tank Removal page
5.26.
NOTICE
Removing the fuel tank will give access to the rear
springband clamp securing the coolant hose to the
coolant bottle.
5. Drain the coolant.
6. Remove the brake caliper mounting fasteners
move the brake caliper to the side. Discard caliper
mounting fasteners.
7. Remove the two plastic rivets
connector placement bracket.
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
© Copyright Polaris Inc.
8. Remove the two fasteners
9. Slide the springband clamps
q
and
10. Carefully remove the coolant bottle.
w
securing the
If thermostat replacement is required, the coolant bottle
ENGINE / COOLING / EXHAUST
e
bottle to the footrest.
r
hoses attached to the coolant bottle and disconnect
all the cooling hoses.
NOTICE
must be replaced.
securing the coolant
3
down the coolant
3.135