Stator Removal / Inspection - Polaris 850 MATRYX INDY XC 129 2021 Manual

ENGINE / COOLING / EXHAUST
8. Using the Flywheel Puller tool
i
screws into the flywheel.
Flywheel Puller:
PU-52498
NOTICE
Do not thread the puller screws into the magneto/stator
located behind the flywheel.
9. Turn the puller center bolt in until the flywheel
"pops" off of the crankshaft.
3.66
u
, insert the puller's
o
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual

STATOR REMOVAL / INSPECTION

1. Remove the flywheel. See Flywheel Removal /
Inspection page 3.65.
2. Remove the fasteners
3. Remove the stator wire retainer
trigger coil wires from contacting the flywheel.
4. Remove the three fasteners
q
securing the trigger coils.
w
that prevents the
e
securing the stator.
© Copyright Polaris Inc.