BATTERY / ELECTRICAL
BATTERY HARNESS ROUTING
1. Connect one end of the battery / solenoid cable to the left solenoid post
w
terminal
.
2. Connect the negative battery cable to the negative battery terminal
clip on the right footrest.
3. Connect the solenoid end of the positive battery cable to the right solenoid post
toward edge clip on the right footrest.
4. Secure the positive and negative battery cables together with the edge clip / panduit in location shown
10.86
NOTICE
The white tape signifies a retention point.
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
q
and the other end to the positive battery
e
and route the cable downward toward edge
r
and route the cable downward
t
.
© Copyright Polaris Inc.