7. Push the shock rod down into the shock body to expel
all of the nitrogen from the shock.
8. Remove the shock rod / bearing cap from the shock
body.
CAUTION
Residual nitrogen gas may exist inside shock. Wear
eye protection and use caution when removing shock
rod / bearing cap.
9. Remove the shock from the vise and pour shock oil
into an approved container. Place shock back into
vise.
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
© Copyright Polaris Inc.
STEERING / SUSPENSIONS
10. Push the reservoir cap down, and remove the snap
ring.
11. Remove the reservoir cap from the reservoir.
12. Remove the bleed screw and O-ring from the internal
floating piston (IFP).
8
8.103