Rear Suspension Installation - Pro - Polaris 850 MATRYX INDY XC 129 2021 Manual

STEERING / SUSPENSIONS

REAR SUSPENSION INSTALLATION - PRO-

CC
NOTICE
Track not shown for clarity.
1. If the track and driveshaft were removed, these
components must be reinstalled before the rear
suspension can be installed.
2. Pivot the rear suspension
track.
3. Loosely install the washers
to-tunnel mount bolts
NOTICE
Right side shown.
8.44
i
back into the tunnel and
u
and front torque-arm-
y
.
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
4. Loosely the two upper carrier fasteners
t
.
NOTICE
Right side shown.
5. When all four rear suspension mounting bolts are
installed, torque all to specifications.
TORQUE
Front Torque Arm-to-Tunnel Mount Fasteners:
46 ft-lbs (63 N·m)
Upper Carrier Fasteners:
33 ft-lbs (45 N·m)
6. Perform the Track Alignment and Track Tension
Adjustment procedures.
r
and nuts
© Copyright Polaris Inc.