Polaris 850 MATRYX INDY XC 129 2021 Manual page 628

BATTERY / ELECTRICAL
5. Connect the handlebar connections connector
left hand controls connector
harness. Make sure the connectors get secured to
the air box with the Christmas tree clips on the
connectors.
6. Place console switch panel
position and connect the main harness key switch
connector to the key switch
10.22
r
and
t
from the main
w
near its installed
e
.
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
7. Install the two push rivets securing the console switch
panel.
IMPORTANT
If a heater is replaced, it must be calibrated with Digital
Wrench, otherwise the control will not be accurate.
If more than one heater is replaced, the CALIBRATE
ALL option in Digital Wrench will be necessary.
© Copyright Polaris Inc.