BATTERY / ELECTRICAL
ENGINE COOLANT TEMPERATURE (ECT) SENSOR HARNESS ROUTING
q
1. The ECT sensor
is secured to the cylinder head.
e
2. The ECT sensor jumper harness should route upward. Connect the ECT jumper harness connector
to the main
harness connector.
NOTICE
w
Ensure the ECT sensor jumper harness slack is secured with a panduit strap
as shown.
IMPORTANT
ECT IS GLUED TO JUMPER HARNESS CONNECTOR! DO NOT ATTEMPT TO SEPARATE THE ECT FROM THE
JUMPER HARNESS.
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
10.32
© Copyright Polaris Inc.