Air Box Removal - Polaris 850 MATRYX INDY XC 129 2021 Manual

AIR BOX REMOVAL

1. Remove the side panels and hood.
2. Remove the console. See Console Removal page
9.23.
3. Remove the drive belt and driven clutch. See the
following procedures for removal:
• Drive Belt Removal
• Driven Clutch Removal
4. Remove the oil tank mounting fasteners
w
washers securing the oil tank to the clutch guard.
Pull the oil tank away from the clutch guard just
enough to access the intake tube screw.
IMPORTANT
Do not damage the oil supply hose when moving the oil
tank.
e
5. Remove the fasteners retaining the rear of the
r
clutch guard and remove the clutch guard by
sliding the front out of the fender.
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
© Copyright Polaris Inc.
6. Remove the push rivets
the intake plenum.
q
and
7. Remove the cable tie
tube to the chassis.
8. Remove the diagnostic connector
9. Remove the fastener
tube.
ENGINE / COOLING / EXHAUST
y
retaining the intake tube to
y
securing the upper intake
u
from the cap.
i
retaining the lower intake
3
3.143