CHASSIS
q
5. Reinstall the fenders
6. Reinstall the engine assembly. Reference engine
installation procedure.
FRONT TUNNEL BULKHEAD COOLER
REMOVAL
1. Remove the following components:
• Engine assembly (See Engine Removal page 3.31)
• Fuel tank assembly (See Fuel Tank Removal page
5.26)
• Bulkhead floor plate (See Bulkhead Floor Plate
Removal page 9.35)
q
2. Drill out the rivets
securing the cooler to the top of
the tunnel.
9.36
.
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
3. Remove the fasteners
sides of the tunnel. Drill out the rivet
cooler to the chaincase housing.
4. Remove the cooler from the chassis.
5. Remove any residual adhesive from the tunnel and/or
cooler if it is going to be re-used.
w
securing the cooler to the
e
securing the
© Copyright Polaris Inc.