Polaris 850 MATRYX INDY XC 129 2021 Manual page 198

ENGINE / COOLING / EXHAUST
28. Connect the PBR connectors
2$
to the PBR.
29. Install the spark plugs
TORQUE
Spark Plug:
22 ft-lbs (30 N·m)
3.44
2#
and Stator connector
2@
. Torque to specification.
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
30. Connect the ignition coils connectors
harness and install the spark plug caps
spark plugs.
NOTICE
Make sure the spark plug wires snap into place.
Be sure the MAG and PTO plug wires are correct
l
31. Install the fasteners
1(
.
TORQUE
Left Support Brace Fasteners:
22 ft-lbs (30 N·m)
32. Install the drive clutch, driven clutch, and drive belt.
See the following procedures for installation:
• Drive Clutch Installation page 7.22
• Driven Clutch Installation page 7.28
• Drive Belt Installation page 2.24
2)
to the wire
2!
onto the
that retain the support brace
© Copyright Polaris Inc.