BATTERY / ELECTRICAL
CONTROLLERS / CONVERTERS
EV ACTUATOR WIRE HARNESS
CONNECTOR
q
The EV actuator
6 pin wire harness connector
differs from the vehicle's other wire connectors in that it
uses a locking mechanism
remains connected during vehicle operation.
The connector cannot be removed from the actuator
when the lock is engaged. To disengage the lock, pull it
back with your fingernail.
When reinstalling the connector, push the connector onto
the actuator. A "click" should be heard.
Then, push the lock into the connector. When the lock is
pushed in, a second "click" should be heard.
NOTICE
The position of the connector lock mechanism should
be checked if you are experiencing diagnostic trouble
codes related to the E-VES system or if the EV Learn
Procedure fails due to insufficient battery voltage and
the battery is supplying at least 12.5 volts.
10.76
w
A
to ensure the connector
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
EV ACTUATOR CONNECTOR PINOUT
COMPONENT
COLOR
q
EV Actuator
WH / DG
Pin 1
w
EV Actuator
WH / DB
Pin 2
e
EV Actuator
Pin 3
r
EV Actuator
RD / WH
Pin 4
t
EV Actuator
BN / WH
Pin 5
y
EV Actuator
DG / OG
Pin 6
FUNCTION
EV Actuator H-
Bridge (-)
EV Actuator H-
Bridge (+)
N/A
N/A
ECU 5V Sensor
Power
ECU Ground
EV Actuator
Position
© Copyright Polaris Inc.