2. Route the TPS wire lead up to the stator wire retainer and secure wire lead with a panduit strap
3. Route the TPS wire lead upward toward the coolant bottle and secure on the outside of the hose/electrical support
e
with a panduit
. Continue to route the TPS wire lead upward and secure in the hose/electrical support with a
r
panduit
.
4. Complete routing by connecting TPS connector
connector placement bracket using the Christmas tree clip on the connector.
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
© Copyright Polaris Inc.
t
to the main harness connector. Secure the TPS connector to the
ENGINE ELECTRICAL
w
.
4.19
4