Spindle Service; Spindle Removal - Polaris 850 MATRYX INDY XC 129 2021 Manual

STEERING / SUSPENSIONS

SPINDLE SERVICE

SPINDLE REMOVAL

1. Raise the front of the snowmobile off the ground with
a dedicated sled lift or floor jack.
q
2. Remove nut , fastener
NOTICE
Note the orientation of the fastener and washers.
r
3. Remove the ski and ski bumper
NOTICE
Note the orientation of the ski bumper.
8.20
w e
, and washers from ski.
t
.
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
y
4. Remove the nut, , washer
i
end from the spindle. Discard the flange nut.
NOTICE
Note the position of the washer under the rod end.
o
5. Remove the nut , washers
arm spherical bearing
NOTICE
Note the position of the washers.
u
, and steering tie rod
a
, and upper control
s
. Discard the flange nut.
© Copyright Polaris Inc.