Switches; Ignition Switch; Oil Level Sender; Auxiliary Stop Switch - Polaris 850 MATRYX INDY XC 129 2021 Manual

BATTERY / ELECTRICAL

SWITCHES

IGNITION SWITCH

Test the ignition switch using a digital multimeter.
Reference the continuity table and test each circuit as
the key is turned. Replace ignition switch if testing
indicates an open connection.
PIN CONTINUITY
SWITCH POSITION
Off
On
Start
NOTICE
The keys used with the 3 position key switch can be
duplicated only by obtaining a key blank and having it
cut by mating it with an existing key.
If both of the original keys are lost, the ignition switch
assembly must be replaced.
10.78
CONTINUITY BETWEEN
Pins E and F
Pins C and D
Pins A and F
Pins A and B
Pins C and D
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual

OIL LEVEL SENDER

To test the oil level sender, position the sender as it
would be in the oil tank. Allow the float to drop in the
direction it would if the oil tank were empty. Continuity
should be present when using a multimeter to test the
sender with the float in the "empty" position.
No continuity should be present when the float is moved
away from the "empty" position.

AUXILIARY STOP SWITCH

The auxiliary stop switch is a hard stop switch and will
shut off the engine when pushed down. Test for
continuity at the handlebar connections connector.
PIN CONTINUITY
SWITCH CONTINUITY
POSITION BETWEEN
Up
Down Pins 9 and 10
FUNCTION
-
Run
Shutdown
© Copyright Polaris Inc.