General Information; Diagnostic Power Connector - Polaris 850 MATRYX INDY XC 129 2021 Manual

ENGINE ELECTRICAL

GENERAL INFORMATION

DIAGNOSTIC POWER CONNECTOR

Connect the diagnostic power connector to the Next-Gen
Service Power Harness (PS-52573) to test for or supply
battery power to the specified systems.
4.2
The function of each connector on the Next-Gen Service
Power Harness (PS-52573) are as follows:
Gauge PWR
Critical PWR
ECU PWR
Fuel Prime
Fuel pump prime can be done through Digital Wrench.
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
Connect 12 VDC battery voltage to this
connector to power all DC chassis
Chassis
components including hand warmers
PWR
and thumb warmer.
(RD/WH – BRN Circuits)
Connect 12 VDC battery voltage to
power instrument cluster, lights, and to
supply power to EV actuator when
viewing data list items and the engine
is off.
(RD/BK – BRN Circuits)
Connect 12 VDC battery voltage to this
connector to power fuel pump and oil
pump. Also provides the power to the
EV Learn Relay.
(RD – BRN Circuits)
Connect 12 VDC battery voltage to this
connector to power the ECU, Digital
Wrench, and PBR.
(OG – BRN Circuits)
Not Applicable
Prime
Not Applicable
Jumper
IMPORTANT
© Copyright Polaris Inc.