Dry-Shipped Agm Battery; Battery Activation (Electric Start Models Only) - Polaris 850 MATRYX INDY XC 129 2021 Manual

BATTERY / ELECTRICAL

DRY-SHIPPED AGM BATTERY

BATTERY ACTIVATION (ELECTRIC START
MODELS ONLY)
ALWAYS wear safety glasses and protective gloves
when activating a battery. Clean all spills immediately.
PREREQUISITES
1. Remove the battery from the vehicle and place on a
level surface.
2. Remove the electrolyte container from the package.
ACTIVATION
1. Remove the sealing strip on top of the battery.
IMPORTANT
Do not remove the sealing strip until ready to activate
the battery.
10.46
WARNING
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
2. Remove the top strip of caps on the electrolyte
package.
NOTICE
Retain this strip of caps for battery sealing after it has
been filled.
DO NOT pierce or otherwise open the foil seals on the
electrolyte container or attempt to separate the
individual electrolyte containers.
3. Place the electrolyte container with the foil seals
facing down into the cell filler ports on the battery.
4. Press down evenly to break the foil seals and allow
electrolyte to flow into the battery.
NOTICE
Air bubbles will begin to rise, indicating the flow of
electrolytes.
WARNING
© Copyright Polaris Inc.