Polaris 850 MATRYX INDY XC 129 2021 Manual page 276

ENGINE / COOLING / EXHAUST
High-Port (Upper / Lower Blades Fully Retracted)
8. If the actuator cable functions properly during the
travel test, it is recommended to re-assemble the
cable onto the servo motor lever pin. No further
service is required.
9. If the actuator cable does not travel the specified full
in / full out distance, sticks, or is damaged, E-VES
service is recommended. See Engine chapter for
more information.
10. To reinstall the actuator cable, verify the cable
routed over the bulkhead cross tube
NOTICE
Exhaust pipe removed in image for clarity.
11. Install the cable rod end back onto the servo motor
e
lever pin .
12. Install cable staked nut into bracket. Verify the staked
nut hex is seated in bracket
13. Install nut and torque to specification.
TORQUE
E-VES Actuator Cable Jam Nut:
13 ft-lbs (18 N·m)
3.122
q
is
w
.
r
.
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
© Copyright Polaris Inc.