3. Disconnect the brake switch connector
4. Remove the clamp fastener
5. Remove the banjo bolt and discard the crush
washers.
6. Move the master cylinder / lever assembly to a clean
workspace on a work bench.
7. Remove the cover fasteners
u
. Drain any residual brake fluid out of the reservoir
into a suitable container.
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
© Copyright Polaris Inc.
e
.
r
.
t
y
, cover
, and damper
FINAL DRIVE / BRAKE SYSTEMS
i
8. Remove the fastener
securing the reservoir to the
valve body. Remove the reservoir
a
9. Note the O-ring
on the top side of the valve body.
The O-ring must be replaced if damaged or worn.
o
.
6
6.39