FUEL SYSTEM
15. Connect the hood harness connector
harness.
NOTICE
Verify the harness connectors are clean and dry prior to
assembly.
16. Rotate the 1/4 turn fasteners
the hood to secure the rear of the hood to the
console.
17. Align the tabs at the bottom of the side panel
the slots in the fender and carefully insert.
5.32
r
to the main
e
at the rear corners of
w
with
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
w
18. Close the side panel
three 1/4 turn latches
the side panel onto opposite side of the snowmobile.
and secure by rotating the
q
. Repeat this step to install
© Copyright Polaris Inc.