Polaris 850 MATRYX INDY XC 129 2021 Manual page 590

CHASSIS
5. Install the two fasteners
and lower intake plenum to the over-structure. Torque
fastener to specification.
TORQUE
Console Fasteners:
71 in-lbs (8 N·m)
6. Install the seat and secure with 1/4 turn latch.
t
7. Install the hood by inserting the front of the hood
into the nosepan.
9.26
y
that secure the console
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
8. Connect the hood harness connector
harness.
NOTICE
Verify the harness connectors are clean and dry prior to
assembly.
9. Rotate the 1/4 turn fasteners
the hood to secure the rear of the hood to the
console.
10. Align the tabs at the bottom of the side panel
the slots in the fender and carefully insert.
r
to the main
e
at the rear corners of
w
with
© Copyright Polaris Inc.