General Information; Torque Specifications - Engine - Polaris 850 PRO-RMK 155 2020 Manual

ENGINE / COOLING / EXHAUST

GENERAL INFORMATION

TORQUE SPECIFICATIONS - ENGINE

NOTICE
Reference assembly illustrations for torque values not
listed in table.
Never re-use locking flange nuts (lock nuts). Always
replace locking flange nuts with new parts are removal.
Some screws / bolts are pre-coated with thread locking
agent. Always replace this fasteners with new parts, or
apply thread locking agent to threads prior to
installation.
ENGINE FASTENERS
ENGINE
ITEM
Intake Tube Air Box
Fastener
Oil Tank Fastener
Throttle Cable Lock Nut
Throttle Body Adapter
Plate Gear Clamps
Air Box Throttle Body
Gear Clamps
Air Box Coil Fasteners
Engine Mount Fasteners
Engine Mount Fasteners
Left Front Mount
Front MAG Engine Mount
Base Fasteners
Rear MAG Engine Mount
Base Fasteners
Spark Plug
Cooling Hose Clamp
Coolant Bottle Bracket
Fasteners
3.4
WARNING
TORQUE
36 in-lbs (4 Nm)
7 ft-lbs (9 Nm)
44 in-lbs (5 Nm)
11 in-lbs (1.24 Nm)
11 in-lbs (1.24 Nm)
ft-lbs (Nm)
40 ft-lb (54 Nm)
26 ft-lbs (35 Nm)
22 ft-lb (30 Nm)
26 ft-lbs (35 Nm)
22 ft-lb (30 Nm)
5 ft-lbs 7 Nm
7 ft-lbs (9 Nm)
PATRIOT ENGINE TORQUE VALUES
ITEM
Cylinder Head Fasteners
(M8 x 1.25 x 50)
Spark Plug
Cylinder Fasteners
(M10 x 1.50 x 83)
Cylinder Fasteners
(M10 x 1.50 x 127)
Crankcase Fasteners
(M8 x 1.25 x 50)
Crankcase Fasteners
(M8 x 1.25 x 80)
Stator Fasteners
(M6 x 1.0 x 32)
Flywheel Flange Nut
(M14 x 1.50)
CPS Fasteners
(M5 x 0.8 x 10)
Recoil Starter Pulley
Fasteners
Recoil Housing Fasteners
Recoil Friction Plate
Fastener
Engine Mount Fasteners
(M8 x 1.25 x 20)
Engine Mount Bracket
Nut
(M8 x 1.25)
Water Pump Cover
Fasteners
(M6 x 1.0 x 20)
9850060 R02 - 2020-2021 850 AXYS™ Long Track Snowmobile Service Manual
ENGINE
TORQUE
23 ft-lbs (31 N·m)
22 ft-lbs (30 N·m)
40 ft-lbs (54 N·m)
Apply VES oil under
fastener head and to
threads prior to
installation.
40 ft-lbs (54 N·m)
Apply VES oil under
fastener head and to
threads prior to
installation.
24 ft-lbs (32 N·m)
Apply VES oil under
fastener head and to
threads prior to
installation.
24 ft-lbs (32 N·m)
Apply VES oil under
fastener head and to
threads prior to
installation.
12 ft-lbs (16 N·m)
90 ft-lbs (122 N·m)
53 in-lbs (6 N·m)
10 ft-lbs (13 N·m)
Apply Loctite 262
9 ft-lbs (12 N·m)
15 ft-lbs (20 N·m)
18 ft-lbs (24 N·m)
18 ft-lbs (24 N·m)
Hold mount in place when
torquing
9 ft-lbs (12 N·m)
© Copyright Polaris Inc.