Using Speed Dialling; Sending A Document With Speed Dialling - Canon L240 User Manual

Using Speed Dialling

Once you have registered fax/telephone numbers for one-touch speed dialling
( p. 6-3), coded speed dialling (
begin to send documents or make telephone calls with speed dialling.

Sending a Document With Speed Dialling

Follow this procedure to send a document using one-touch speed dialling, coded
speed dialling, or group dialling:
1
Load the document, face down in the ADF
(
•
•
2
Enter the one-touch speed dialling button or
coded speed dialling code assigned to the fax
number or group you want to send to.
❏ One-touch speed dialling button:
❏ Coded speed dialling code:
3
Press Start/Copy to begin scanning for
sending, or wait a few seconds for the FAX to
begin scanning automatically.
•
6-16 Speed Dialling
p. 4-3).
To adjust the resolution and contrast,
see pp. 7-2, 7-3.
You may be unable to send if the memory
used (shown in the LCD) is close to
00%
. To free up space in the FAX's
memory: print, send, or delete any
documents you no longer need to be
stored in memory (
Press the one-touch speed dialling button
you want.
Press Coded Dial, then use the numeric
buttons to enter the two-digit code you
want.
• If you make a mistake, press Stop
and repeat this step.
NO TEL #
• appears if no fax/
telephone number or group is
assigned to the speed dialling button
or code you pressed.
If you do not want the FAX to begin
scanning automatically after a few
seconds, disable the TIME OUT setting
( p. 14-6).
p. 6-8), or group dialling (
p. 9-5).
p. 6-13), you can
Ex: MEMORY USED 0%
(Currently used memory)
DOCUMENT READY
(Standby to scan)
Chapter 6