Conformance To Ec Directives And Ul Standards - Panasonic MINAS S Series Operating Manual

EC Directives
Conformance to EC Directives and UL
Standards
The EC Directives apply to all such electronic products as those having specific functions and
directly sold to general consumers in EU countries. These products are required to meet the EU
unified standards and to be furnished with CE Marking.
However, our AC servos meet the EC Directives for Low Voltage Equipment so that the machine
or equipment comprising our AC servos can meet relevant EC Directives.
EMC Directives
Our servo systems can meet EMC Directives and related standards. However, to meet these
requirements, the systems must be limited with respect to configuration and other aspects, e.g.
the distance between the servo amplifier and motor is restricted, and some special wiring
conditions must be met. This means that in some cases machines and equipment comprising our
servo systems may not satisfy the requirements for wiring and grounding conditions specified by
the EMC Directives. Therefore, conformance to the EMC Directives (especially the requirements
for emission noise and noise terminal voltage) should be examined based on the final products
that include our servo amplifiers and servo motors.
Applicable Standards
Subject Applicable standard
Motor IEC60034-1
Motor
EN50178
and
amplifier
IEC61800-3
EN55011
IEC61000-4-2
IEC61000-4-3
IEC61000-4-4
IEC61000-4-5
EMC Requirements for Variable Speed Electric
Power Driven Systems
Radio Disturbance Characteristics of Industrial, Scientific and Medical (ISM)
Radio-Frequency Equipment
Electrostatic Discharge Immunity Test
Radio Frequency Electromagnetic Field
Immunity Test
Electric High-Speed Transition Phenomenon -
Burst Immunity Test
Lightening Surge Immunity Test
- App. 2 -
Standards
referenced
by Low-
Voltage
Directive
Standards
referenced
by EMC
Directives