Install noise filfers
39 1
34 1
Noise Filter
The noise filters conform to UL508C (File No. E164620) to satisfy the following conditions.
1) The servo amplifier should be used under Contamination Level 2 or 1 specified by IEC606641
(housing the amplifier in an IP54 control box).
2) Install a circuit breaker or fuse between the power supply and noise filter. The circuitbreaker or
fuse should be a UL listed
should be per the table in page 20.
Weight:
Optional Part
No.
DVOP1441
DVOP1442
marked type. The current rating of the circuit breaker or fuse
- App. 7 -
62.8 g
Manufacturer's
Product No.
3SUP-A10H-ER-4
3SUP-A30H-ER-4
Manufacturer
Okaya Electric
Industries Co.,
Ltd.