Table of Contents
Advertisement
Optional Parts
Be sure to assemble the amplifier with the machine and check the operating limit so that the
surface temperature of the regenerative discharge resistor may be 100Åé or lower on poor
conditions likely to cause generation of regenerative discharge resistance (such as high supply
voltage, large load inertia and short deceleration time).
Recommended
combination
regenerative discharge resistor
Amplifier
Single-
type
phase 100V
1
DVOP2890
2
x 1
3
Regenerative discharge resistor reaches high temperature.
Device measures to avoid fire and burns.
When mounting the amplifier, do not install near flammables.
Do not install in a place reached by hand.
between
amplifier
Power supply
Single phase/Three-phase 200V
DVOP2891
x 1
- App.54 -
and
external
For amplifier types, see
pages 10 and 11.
Advertisement
Table of Contents
