Panasonic MINAS S Series Operating Manual page 31

System Configuration and Wiring
• The model numbers of circuit breaker and magnetic contactors shown in the above list are
manufactured by Matsushita Electric Works, Ltd.
• Use the circuit breaker as shown in App.3 to meet relevant EC Directives.
• The model number of noise filters (options) shown in the above are manufactured by Okaya
Electric Industries Co., Ltd.
<Notes>
• CN POWER, CN MOTOR and earth terminals
Wires should be copper conductors of a temperature rating of 60˚C or above.
• Earth wire diameter should be 2.0 mm
• Please also consider the electrochemical potentials between metal conductor including closed
loop terminals.
The electrochemical potentials shall be less than 0.6V.
2 (AWG14) or larger.
For 3-phase 200VAC
For 1-phase 100V/200V
- 30 -