Table of Contents
Advertisement
Setting the Parameters for amplifier, storing them, and writing in the memory (EEPROM)
1)
Monitoring input/output status, monitoring pulse input, monitoring load ratio.
2)
Checking current error status and error history
3)
4)
Measurement of wave form graphic data, and storage and reading of the data
Automatic tuning
5)
Measurement of frequency characteristics
6)
How to Connect
Setting the Parameters
Installing PANATERM
<Notes>
1. The memory capacity of the hard disc should be 15MB or more. Prepare OS of Windows"95 or
Windows"98.
2. Install PANATERM" with setup discs, otherwise the software does not work.
Procedure
Turn on your personal computer. Start Windows " 95 (or 98).
1)
(If there is any application program on, close all of them.)
Insert the PANATERM" setup floppy disk in the floppy disk drive.
2)
3)
Start Explorer, and switch (select) to the floppy disk drive. (For the procedure for starting the
Explorer program,see the instructions for Windows".)
Setup disc of DVOP2820 communication
software
on a hard disc
"
- 57 -
DVOP1960
(DOS/V)
DVOP1160
(For PC-98 series)
PANATERM "
Advertisement
Table of Contents
