Chapter 2 Instructions For Use; Instructions For Designing; Fail-Safe Function; Conformity To Ec Directives - Panasonic SL-VGU1-EC User Manual

Chapter 2 Instructions For Use

Instructions for Designing

Fail-safe function

CAUTION
Disconnection of a signal line, instantaneous power failure, or abnormal signal may cause a problem.
For this reason, please adopt a fail-safe function for the entire system by yourself.
To ensure safety, be sure to incorporate the interlock circuit, limit circuit, or the like, in the external cir-
cuit excluding the S-LINK V system circuit.
To connect the S-LINK V gateway controller to your system, be sure to adopt a fail-safe function.
Regarding the fail-safe function, if you have an unclear or doubtful point, please contact our sales division.

Conformity to EC Directives

WARNING
The S-LINK V gateway controller conforms to various standards. However, to connect the gateway
controller to your system, check that the entire system can conform to various standards.
To conform to the EC Directives, the S-LINK V system is tested in accordance with the EMC Directive stan-
dards, such as EN 61000-6-4 of the EMI standard and EN 61000-6-2 of the EMS standard. When you incorpo-
rate the S-LINK V system in your machine or equipment, check that the wiring condition conforms to the require-
ments of the EC Directives.

Use with conventional products

The S-LINK V system cannot be used together with the conventional S-LINK system. Use with a conventional
system may cause abnormal operation or damage.
Configure the system by each series of the S-LINK V system, or the conventional S-LINK system.
S-LINK V
gateway
controller
5
S-LINK V S-LINK
unit unit
Not good
S-LINK V
gateway
controller
S-LINK V S-LINK V
unit unit
Good
S-LINK
gateway
controller
S-LINK S-LINK
unit unit