Panasonic MINAS S Series Operating Manual page 96

The scale is not appropriate.
Conform to EC Directives and UL Standards
Holding brake
Dynamic brake
Timing chart
Allowable loads on output axes
Homing operation (Precautions)
Details of Parameters
Optional Parts
(Amplifier power connection connector kit, encoder relay cable, motor
replay
Recommended Parts
• Surge absorber for motor brake
• List of peripheral equipment manufacturers
Outer Views and Dimensions
• Motor
App. 48
• Amplifier
App. 50
Properties
• Overload protection: time-related characteristics App. 53
Specifications
Appendixes
cable, motor brake relay cable, monitor connector, motor encoder
connection connector kit, controller connection connector kit,
connector connection interface cable, communication cable,
communication control
regenerative discharge resistor, reactor)
App. 47
Correct the values of Pr46 (numerator of 1st command
pulse ratio), Pr4A (Multiplier of numerator of command
pulse radio) and Pr4B (denominator of pulse command
ratio). See "Details of Parameters" chapter.
software [PANATERM
App. 47
- 95 -
App. 2
App. 6
App. 8
App. 10
App. 14
App. 15
App. 16
"
], external
App. 38