10
Troubleshooting and Diagnostics
Recommended Tests to Conclude Troubleshooting
Recommended Tests to Conclude
Troubleshooting
The following table shows the most important tests to conclude troubleshooting.
•
•
Table 36
Recommended Tests for 2D-LC System Troubleshooting
Pump
Column
Compartment
Pressure Test
Thermostat Test
Leak Test
Pressure Test (if
column valve is
present)
Pump characteristic
•
Pump Ripple (1260 Pump)
•
Tuning (1290 pump)
2D-LC User Guide
For further detailed information, see:
•
Maintenance information in the specific manual of each module.
•
Troubleshooting Guide poster 5994-0709EN.
•
Best Practice for Using an Agilent LC System 01200-90090.
For additional help, contact your local Agilent Technologies service
representative.
Autosampler
Pressure Test
Inject standards or
inject different
volumina or blanks
Valve
Detector
Switching valve
Lamp Intentity
position/Check
Test
pressure reading
Wavelength
Pressure Test
calibration
In addition there
are detector
specific tests.
2D-LC Instrument
Run Checkout
For 2D-LC
Instruments
•
Pressure test
of the 1D-LC
Part
•
Pressure Test
of the 2D-LC
Part
304