Method Editor 2D-Lc - Agilent Technologies 1290 Infinity II 2D-LC User Manual

6 Method Parameters

Method Editor 2D-LC

Method Editor 2D-LC

The method setup dialog is used to edit the 2D-LC specific method parameters.
Figure 66
The setup of following method parameters is available:
•
•
•
•
•
•
•
•
•
•
•
•
To get more information, in the software press F1 that starts the Online Help of
NOTE
the software.
2D-LC User Guide
2D-LC method setup
2D-LC Operation Mode, see
Solvents, see "Define the 2D Solvent"
Flow settings, see "Define the Stoptime"
Stoptime, see "Define the Stoptime"
Posttime, see "Define the Posttime"
Sampling table, see "Edit the Sampling Table"
2D Gradient, see "Define the 2D Gradient"
Flush Gradient, see "Use the Flush Gradient"
Peak Detector Operating values, see
Advanced, see "Use the Advanced 2D Pump Settings"
Reference Chromatogram, see
Analytical or Flush Gradient Preview, see
with the Graphical User Interface"
"2D LC Operation Mode"
on page 130
on page 130
on page 130
on page 132
on page 133
on page 139
on page 147
"Use Peak Trigger"
"Preview (2D-LC)"
"Setup Second Dimension Gradient
on page 175
on page 127
on page 148
on page 152
on page 154
126