Table of Contents
Advertisement
4
Installation
Software Installation
Software Installation
2D-LC Software Installation in Agilent Masshunter
Workstation
A compatible CDS must be installed first. For details, see the CDS
Prerequisites
documentation.
To observe if your computer full fills the requirements, like for the hardware CPU,
memory, hard disk space and the software, check the windows settings.
It is recommended to use the Windows 10 Professional for MassHunter
Workstation.pdf (p/n G3336-90036) as guidance for the installation.
•
•
•
•
•
•
NOTE
•
•
•
For 2D-LC setups only the noncompliant workstation that includes 2D-LC
NOTE
support will work. Workstation Plus and Enterprise will not support 2D-LC.
1 Install the Data Acquisition program.
2 Install the Qualitative Analysis program.
3 Install the Quantitative Analysis program.
[OPTIONAL]
4 Install Microsoft Excel.
2D-LC User Guide
Set up the computer system
Check PC network card configuration
Prepare for installation
To make sure you have the latest critical updates and security fixes, run
Windows Update
Make sure that Windows Update is completed before you continue
If you are upgrading from a Q-TOF 10.x build, uninstall 10.x first.
Be sure that there has been no other MassHunter installations on the PC or
you will need to re-image.
Be sure ALL Windows Updates are COMPLETED before Installing a build the
first time or you may have to re-image again.
Decide on the installation type. This decision is permanent.
If you change your mind later, you will have to re-image.
89
Advertisement
Chapters
Table of Contents
Troubleshooting
