5
2D-LC Data Acquisition in MassHunter Workstation 11
Instrument Details
Instrument Details
In some case, it may be necessary to check the various details such as the
firmware and driver version.
The following options to obtain this information exist:
•
•
If an upgrade is needed, see , or contact your Agilent sales representative.
NOTE
Use Module List to Obtain Instrument Details
1 Start the Data Acquisition program.
2 Click the i Icon in the low right corner of the dashboard.
3 Click Print or Close.
2D-LC User Guide
"Use Module List to Obtain Instrument Details"
"Use Instrument Configuration Report to Obtain Instrument Details"
page 121
Module List screen shows up.
on page 120
on
120