You can set reserve jobs while the machine is warming up. Touch the LCD
screen to change the Warm-up Screen to the Basic Screen, then check that
the message "Ready to copy reserve" is displayed on the Basic Screen. See p.
3-11 to p. 3-12.
3.
The Basic Screen will be displayed.
The message on the Basic Screen will inform you that copying job is now available.
• When the initial settings are changed by the Key Operator, the modified
• When "Enter E.C.M. password" is displayed, enter your password to use the
• When "Set the key counter" is displayed, insert the key counter to its inlet on
Turning On the Power Switch (continued)
conditions will be displayed on the Basic Screen.
machine.
the right side of the main body.
2
Machine
Information
Machine
Configuration
Turn On/Off
the Power
Loading
Paper
2-17