To Remove The Fan; Figure 54 Removing The Fan - Agilent Technologies 6000 Series Service Manual

6 Replacing 6000L Assemblies

To remove the fan

140
1 Perform the previous procedures:
"To remove the bottom cover"
•
"To remove the system board"
•
"To remove the power supply"
•
Though the fan can be removed without performing all of
the above, it is difficult to reinstall it.
2 Slide the fan and fan mount slightly up and out of the
chassis.
3 Remove the fan from the flexible fan mount.
Figure 54 Removing the fan.
on page 133
on page 136
on page 138
Fan
Chassis Divider
6000 Series Oscilloscopes Service Guide
Flexible Fan
Mount