Figure 55 Installing The Fan - Agilent Technologies 6000 Series Service Manual

6000 Series Oscilloscopes Service Guide
4 Replace the fan.
a Place the rectangular part of the flexible fan mount over
the fan.
b Place the pegs in the flexible fan mount into the holes in
the top and bottom of the fan.
c Align the holes in the bottom of the flexible fan mount
over the studs on the chassis as you slide the fan over the
divider in the chassis.
d Ensure that the notch in the rectangular portion of the fan
mount aligns with the front of the chassis.
Holes in
Bottom Fit
Over Studs
Installing the fan.
Figure 55
Replacing 6000L Assemblies
Pegs Fit in
Fan Holes
6
Align
Notch
and
Chassis
Chassis
Divider
141