Agilent Technologies 6000 Series Service Manual page 3

In This Service Guide
6000 Series Oscilloscopes Service Guide
This book provides the service information for the Agilent 6000
Series Oscilloscopes. This manual is divided into these
chapters:
1 Characteristics and Specifications
This chapter lists characteristics and specifications for the
Agilent 6000 Series Oscilloscopes.
2 Testing Performance
This chapter explains how to verify correct oscilloscope
operation and perform tests to ensure that the oscilloscope
meets the performance specifications.
3 Calibrating and Adjusting
This chapter explains how to adjust the oscilloscope for
optimum operating performance.
4 Troubleshooting
This chapter begins with suggestions for solving general
problems that you may encounter with the oscilloscope.
Procedures for troubleshooting the oscilloscope follow the
problem solving suggestions.
5 Replacing 6000A Assemblies
This chapter describes how to remove assemblies from the
6000A Series oscilloscope.
6 Replacing 6000L Assemblies
This chapter describes how to remove assemblies from the
6000L Series oscilloscope.
7 Replaceable Parts
This chapter describes how to order replaceable assemblies and
parts for the Agilent 6000 Series Oscilloscopes. It includes
diagrams and parts lists for hardware that you can order.
3