List Of Test Equipment; Table 2 List Of Test Equipment - Agilent Technologies 6000 Series Service Manual

2 Testing Performance

List of Test Equipment

Table 2

List of test equipment

Equipment
Test connector, 8-by-2*
Digital Multimeter
Power Splitter
Oscilloscope Calibrator
Signal Generator
Power Meter/Sensor
Oscilloscope Calibrator
BNC banana cable
BNC cable (qty 3)
Cable
Probe cable*
Shorting Cap BNC
Adapter
Adapter
Adapter
Blocking capacitor
Adapter (qty 3)
Feedthrough (qty 2)
* Required only for testing digital channels of oscilloscopes that have the MSO option.
Some parts and equipment are available at www.agilent.com or www.parts.agilent.com.
28
Below is a list of test equipment and accessories required to
perform the performance test verification procedures.
Critical Specifications
See page 29 for instructions on building test connector.
0.1 mV resolution, 0.005% accuracy
Outputs differ by 0.15 dB
DC offset voltage of -5.5 V to 35.5 V, 0.1 V resolution
25 MHz, 100 MHz, 300 MHz, 500 MHz, and 1 GHz
sine waves
±
1 GHz 3% accuracy
25 MHz—500 MHz sine wave, 5 ppm
Type N (m) 609.6 mm (24 in.)
BNC(f) to banana(m)
BNC Tee (m) (f) (f)
Type N (m) to BNC (m)
N(m) to BNC(f)
Ω BNC (f) to BNC (m)
50
Recommended Model/
Part Number
n/a
Agilent 34401A
Agilent 11667B
Fluke 5820A
Agilent N5181A, or
E4400B, or 8648A
Agilent E4418B/8482A
Fluke 5820A
Agilent 11001-66001
Agilent 10503A
Agilent 11500B
Agilent 01650-61607
Agilent 1250-0774
Agilent 1251-2277
Agilent 1250-0781
Agilent 1250-0082
or Pomona 3288 with
Pomona 3533
Agilent 10240-60001
Agilent 1250-0780
Agilent 0960-0301
6000 Series Oscilloscopes Service Guide