Agilent Technologies 6000 Series Service Manual page 56

2 Testing Performance
Power Sensor
56
1 Connect the equipment (see
a Use the N cable to connect the signal generator to the
power splitter input.
b Connect one output of the power splitter to the Ext Trigger
input.
c Connect the power sensor to the other output of the power
splitter.
Oscilloscope
Power Splitter
Power Meter
Figure 7
50Ω Feedthrough*
N to BNC adapter
* Required for 100 MHz models.
Connect equipment for external trigger sensitivity test
(2-channel models)
6000 Series Oscilloscopes Service Guide
Figure 7).
Signal
Generator
N Cable