To Remove The Storage Lid; Figure 19 Installing The Hinged Storage Lid - Agilent Technologies 6000 Series Service Manual

5 Replacing 6000A Assemblies

To remove the storage lid

Insert hinge
into slot
96
The storage lid is designed to come off without breaking.
1 Push back on the lid until it snaps out of the slots.
2 To reinstall the lid:
a Insert the left hinge into the slot.
b Push the lid all the way to the left.
c Snap the right hinge into the slot.
Push
Figure 19 Installing the hinged storage lid
Snap second
hinge into place
6000 Series Oscilloscopes Service Guide