Figure 21. Disconnecting Ribbon Cable And Releasing Tab Retainers - Agilent Technologies 6000 Series Service Manual

Front
Panel
Retainer Tab
Retainer Tab Slot
6000 Series Oscilloscopes Service Guide
Center Retainer Tab
Figure 50
6 Pull the front panel off of the oscilloscope.
7 Lift the front panel PC board to remove it from the front
panel.
8 Reverse this procedure to replace the front panel.
Disconnecting ribbon cable and releasing tab retainers
Replacing 6000L Assemblies
Retainer Tab
100 MHz Auto
Probe Label
500 MHz Auto
Probe Label
Front Panel
Ribbon Cable
System Board
6
Front
Panel PC
Board
135