Installing The Securing Bracket To Prevent The Power Cord From Falling Off - Ricoh MP C6502SP Field Service Manual

• When the left side of the machine is lower: Lower the nuts of the left side of the machine (front
and rear) to lift the left side of the machine.
5. Open the ADF, and then place the level [A] along the side.
6. Adjust the machine level until the machine is less than 5mm from level (measure from front-to-rear).
• When the front side of the machine is lower: Lower the nuts of the front side of the machine
(left and right) to lift the front of the machine.
• When the rear side of the machine is lower: Lower the nuts of the rear side of the machine (left
and right) to lift the rear of the machine.

Installing the Securing Bracket to Prevent the Power Cord from Falling Off

1. Install the securing bracket [A] to prevent the power cord from falling off. ( x1)
Example below: D137/D138
Main Machine Installation
101