Checking The Copy Image With Color Chart; Paper Tray Settings; Paper Library Data Installation - Ricoh MP C6502SP Field Service Manual

Hide thumbs Also See for MP C6502SP:

Table of Contents

Checking the copy image with color chart

If you want to install any options, install them using the installation procedure before doing the

procedure below.

1. Switch the machine to copier mode.

2. Make sure that there is A3 or DLT paper in one of the trays.

3. Put a "Color Chart C-4" on the exposure glass.

4. Select full color mode and print one copy of the chart.

5. Check the results of the copy with the customer.

Adjust the side-to-side registration for each paper tray as necessary.

• SP1-003-001 (Side-to-Side Reg: Tray1)

• SP1-003-002 (Side-to-Side Reg: Tray2)

• SP1-003-003 (Side-to-Side Reg: Tray3)

• SP1-003-004 (Side-to-Side Reg: Tray4)

Follow this procedure to install the Paper Library data.

1. Create a folder in the root directory of an SD card and name the folder "mqp".

2. Copy the paper database file into the "mqp" folder, and then rename the copied file "library.mqp".

3. Make sure that the machine is OFF.

4. Insert the SD card containing the "library.mqp" file into SD card Slot 2 (lower slot) on the rear side

of the machine.

Main Machine Installation

Table of Contents