Pump Screen 1; Pump Screen 2; Pump Screen 3 - Graco ProMix PD2K Operation

Pump Screen Screen 3 3 3
Pump Pump Screen
Pump screen 3 sets the pressure alarm limits for the
pump.
Inlet Pressure Pressure in
When Inlet Inlet Pressure
set to Disabled, the inlet limit fields are grayed
out and only the outlet limit fields are active. See
Pressure Alarm and Deviation Limits, page
Figure 65 Pump Screen 3, Pressure Monitoring
Disabled
Inlet Pressure Pressure in
When Inlet Inlet Pressure
set to Monitor, all fields are active. See
Pressure Alarm and Deviation Limits, page
Figure 66 Pump Screen 3, Pressure Monitoring
Enabled
3A4486D
Pump Screen 1, page 81
87.
Pump Screen 1, page 81
87.
Pressure Alarm Pressure Pressure
Inlet fields are only active if Inlet
is
in Pump Screen 1, page 81
are grayed out if set to Disabled. Outlet fields are
active at all times.
• Alarm and Deviation ranges are 0-300 psi for
low pressure systems, and 0-1500 psi for high
pressure systems.
• Setting to 0 will disable the alarm. The Inlet Alarm
High and Outlet Alarm High cannot
• Alarms and Deviations will display when the inlet
or outlet pressure drops below the low limit or
exceeds the high limit.
NOTE: NOTE: Outlet Alarm Low is only enabled for systems NOTE:
using Flow Control.
is
Setup Mode Screens
Alarm and Alarm and Deviation and Deviation Limits Deviation
Inlet Pressure
Inlet
is set to Monitor; they
cannot be disabled. cannot
Limits Limits
Pressure
Pressure
87