Graco ProMix PD2K Operation page 77

Catalyst (B) (B) Valve Valve (Disabled
Catalyst Catalyst (B) Valve
Enter the desired catalyst valve number (1-8).
NOTE: If you enter a number which is not valid in
NOTE: NOTE:
your system configuration, the field will be highlighted
and the recipe is invalid. For example, if your
configuration has 1 catalyst valve and you enter 4,
the field will be highlighted and the recipe is invalid.
Figure 48 Invalid Recipe Screen
Mix Ratio Ratio (Disabled (Disabled in in in 1K
Mix Mix Ratio (Disabled
Enter the desired mix ratio (0 to 50.0):1.
3A4486D
(Disabled in in in 1K 1K Mode) Mode)
(Disabled 1K Mode)
1K Mode) Mode)
1K Mode)
Potlife Time Time
Potlife Potlife Time
Enter the potlife time (0 to 999 minutes). Entering
0 disables this function.
Target Pressure/Flow Pressure/Flow
Target Target Pressure/Flow
Enter the desired target spray pressure or flow rate,
depending on whether the Mix Unit is configured for
Pressure Control or Flow Control (see Fluid Control
on System Screen 4). This is the pressure or flow
rate the pumps will maintain while mixing. This field
is only available when the Flow Control is set to
'Recipe' (see Flow Control on System Screen 4).
Mix Pressure Pressure Tolerance Tolerance (Disabled
Mix Mix Pressure Tolerance
Mode) Mode) Mode)
The pressure of one component must be within
a percentage (±) of the pressure of the other
component during spray or mix. Set the desired Mix
Pressure Tolerance in this field. The default is 25%.
Setup Mode Screens
(Disabled in in in 1K 1K
(Disabled 1K
77