Graco ProMix PD2K Operation page 13

USB Upload Upload Procedure Procedure
USB USB Upload Procedure
Use this procedure to install a system configuration
file and/or a custom language file.
1. If necessary, follow the USB
Procedure, to automatically generate the proper
Procedure, Procedure,
folder structure on the USB flash drive.
2. Insert the USB flash drive into the USB port of
the computer.
3. The USB flash drive window automatically opens.
If it does not, open the USB flash drive from
within Windows Explorer.
4. Open the Graco folder.
5. Open the system folder. If working with more
than one system, there will be more than one
folder within the Graco folder. Each folder is
labeled with the corresponding serial number of
the ADM. (The serial number is on the back of
the module.)
6. If installing the system configuration settings file,
place SETTINGS.TXT file into UPLOAD folder.
3A4486D
USB Download Download
USB Download
Advanced Display Module (ADM)
7. If installing the custom language file, place
DISPTEXT.TXT file into UPLOAD folder.
8. Remove the USB flash drive from the computer.
9. Install the USB flash drive into the USB port of
the ProMix PD2K system USB port.
10. During the upload, USB BUSY displays on the
screen.
11. Remove the USB flash drive from the USB port.
NOTE: If the custom language file was installed, NOTE: NOTE:
users can now select the new language from the
Language drop-down menu in the Advanced Setup
Screen 1.
NOTE: If the system configuration settings file was
NOTE: NOTE:
installed, it is recommended to remove the file from
the UPLOAD folder on the USB flash drive. This will
prevent inadvertently overwriting any future setup
changes.
13