Graco ProMix PD2K Operation page 81

Pump Screen Screen 1 1 1
Pump Pump Screen
NOTE: NOTE: NOTE: Your system will include 4 pumps. Information
for each pump is accessible under a separate tab in
the menu bar at the top of the screen. Select the tab
for the desired pump. Each pump has three screens.
Only the screens for Pump 1 are shown here, but the
same fields appear on all.
Pump screen 1 includes the following fields which
define the pump.
Figure 54 Pump Screen 1
Pump Size Size
Pump Pump Size
Select 35cc or 70cc, as appropriate.
Inlet Pressure Pressure
Inlet Inlet Pressure
Select one of the following:
• Disabled
• Monitor, to track inlet pressure
Select Color Color Change Change
Select Select Color Change
Select this box if your system uses color change.
3A4486D
Materials Materials Materials
Enter the number of materials used in your system.
Each color change module controls 8 colors.
Hose Length Hose Hose Length Length
Compute the length of the hoses from the supply
stack to the pump and from the pump to the outlet
stack. Enter the total length.
Hose Diameter Hose Hose Diameter Diameter
Enter the diameter of the supply and output hoses.
Available Available Colors Available Colors Colors
The module displays the number of colors available
in your system. This field is not editable.
Valve Mapping Valve Valve Mapping Mapping
Select whether to use Standard, static valve mapping,
or fully configurable Custom valve mapping. The
color change valve mapping is the assignment of
the location of the solenoids in the color change
control modules. A static, pre-determined map layout
makes for an easily predictable and hands-free
option. However, an application and user may benefit
from laying out the valve mapping on their own
for consolidation of equipment, reduced hardware
complexity, or simply to lay out valves according to
what makes most sense.
See Custom Valve Mapping, page 82
detailed information.
Setup Mode Screens
for more
81