Graco ProMix PD2K Operation page 15

Soft Key Key Icons Icons
Soft Soft Key Icons
The following icons appear in the ADM display,
directly to the left or right of the soft key which
activates that operation.
NOTICE
NOTICE NOTICE
To prevent damage to the softkey buttons, do not
press the buttons with sharp objects such as pens,
plastic cards, or fingernails.
Table Table 2 2 2 : : : Soft Table Soft Key Soft Key Key Functions Functions Functions
Key Key Key
Enter Screen
Exit Screen
Accept
Cancel
Toggle
Prime Pump
Pre-Fill Pump
Line/Fill/Run
Mix
Purge
3A4486D
Function Function Function
Press to enter screen
for editing. Highlights
editable data on a
screen. Use Up/Down
arrows to move between
data fields on the screen.
Press to exit screen after
editing.
Press to accept
calibration value.
Press to cancel or reject
calibration value.
Press to switch between
Mix Units on the Spray
and Fill screens.
Press to start a pump
priming procedure.
Press to mark pump
as filled. (Only for
applicable pumps.)
Press to start a line fill
procedure.
Press to start a spray
procedure.
Press to start a purge
procedure.
Advanced Display Module (ADM)
Key Key Key
Solvent Purge
Standby
Stop
Recipe Link
Pressure Check
Volume Check
Pressure Relief
Job Complete
Counter Reset
Move Cursor to Left
Move Cursor to Right
Erase All
Function Function Function
Press to engage solvent
push sequence, when
applicable.
Press to stop all pumps
and put system in
Standby.
Press to link recipe data
for a specific recipe on
both Mix Units.
Press to start a pump
pressure check.
Press to start a pump
volume check.
Appears on the
Maintenance screen
to relieve pump pressure
out the color change
dump valve.
Press to log the material
usage and increment the
job number, for Mix Unit
#1 or Mix Unit #2.
Press to reset the current
usage counter.
Appears on the User ID
Keyboard screen. Use to
move cursor to the left.
Appears on the User ID
Keyboard screen. Use to
move cursor to the right.
Appears on the User ID
Keyboard screen. Use to
erase all characters.
15