Appendix A: Integration With Allen Bradley; Plc - Graco ProMix PD2K Operation

Appendix A: Integration with Allen Bradley PLC
Appendix A: A: A: Integration
Appendix Appendix
This appendix outlines how to integrate a ProMix PD2K with an Allen Bradley Studio 5000 Programmable Logic
Controller (PLC).
To integrate, the ProMix PD2K must have the Ethernet/IP protocol for PLC CGM (Graco Part number CGMEPO)
installed prior to performing this procedure.
In the PLC software, perform the following steps:
1. Add the new Ethernet module.
2. The Select Select Module Select Module Type Module
a. In the search field, type "generic" .
b. Select ETHERNET-MODULE Generic Ethernet Module.
NOTE: Do not select the Close on Create checkbox.
NOTE: NOTE:
c. Click the Create button.
112
Integration with
Integration
Type screen opens. Type
with Allen Allen Bradley Bradley PLC
with Allen Bradley

PLC

PLC
3A4486D