Graco ProMix PD2K Operation page 61

Run Mode Mode Screens
Run Run Mode
NOTE: Selection fields and buttons that are
NOTE: NOTE:
grayed-out on the screens are not currently active.
Opening Opening Screen Opening Screen Screen
At power up, the Graco logo will display for
approximately 5 seconds, followed by the Home
screen.
Home Screen Screen
Home Home Screen
The Home screen displays the current status of the
system. The following table details the information
shown. Only one of the two Mix Units is shown
as active on the Home screen (regardless of the
Mix Unit's status). The active Mix Unit's pumps will
appear highlighted. The other Mix Unit's pumps will
be muted with an arrow icon indicating the user must
toggle mix units by pressing the Up/Down Arrow key.
Figure 19 Home Screen, in Mix Mode with
Diagnostics On
3A4486D
Screens
Screens
Figure 18 Opening Screen
To view pump flow rates and pressures
(as shown), select "Diagnostic Mode" on
System Screen 1, page
Status (D), Solvent Gun (S), Gun Animation (T), and
Recipe Information (U) apply to the active Mix Unit.
Run Mode Screens
68. The Status Bar (C), Error
61